DRIP TIP CHOICES

PUSH FIT 810

STANDARD PUSH FIT  810 ( GOON SIZE ) DRIP TIP. WILL FIT AN ARRANGE OF RDA'S AND TANKS ON THE MARKET.

PLEASE NOTE THAT NOT ALL 810 SIZED RDA'S AND TANKS ARE THE SAME SIZE, THERE CAN BE SLIGHT SIZE DIFFERENCES IN ALL OF THEM. IF IN DOUBT PLEASE CHOOSE THE 810 TIP WITH THE O RINGS.

THE SIZES ARE AN APPROXIMATE SIZE OF THE SIZE I WILL CUT ON THE LATHE.

TOTAL HEIGHT: 12.05 MM.

OUTER DIAMETER: 17.5 MM.

TIP HEIGHT ( PART ABOVE  TOP CAP ): 7.8 / 8MM

INNER BORE: 9.70MM

810 WITH O RINGS

810 SIZE TIP WITH DOUBLE O RINGS AT BASE. WILL FIT 810 SIZED RDA'S AND TANKS. WILL ALSO FIT SMOK TFV8, TFV12 ETC..

THE SIZES ARE AN APPROXIMATE SIZE OF THE SIZE I WILL CUT ON THE LATHE.

TOTAL HEIGHT: 11.35 MM.

OUTER DIAMETER: 18.5 MM

TIP HEIGHT ( PART ABOVE TOP CAP ): 6.22 MM.

INNER BORE: 9.15 MM.

TALL 810 WITH O RINGS

810 SIZE TIP WITH DOUBLE O RINGS AT BASE, TALLER THAN STANDARD 810'S.

WILL FIT 810 SIZED RDA'S AND TANKS, WILL ALSO FIT SMOK TFV8, TFV12 ETC..

THE SIZES ARE AN APPROXIMATE SIZE OF THE SIZE I WILL CUT ON THE LATHE.

TOTAL HEIGHT: 13.7 MM

OUTER DIAMETER: 16.8 MM

TIP HEIGHT ( PART ABOVE TOP CAP ): 8.8 MM

INNER BORE: 9.5 MM.

 

SHORTY 810

SHORTY 810 SIZED TIP, WILL FIT AN ARRANGE OF RDA'S AND TANKS.

THE SIZES ARE AN APPROXIMATE SIZE OF THE SIZE I WILL CUT ON THE LATHE.

TOTAL HEIGHT: 8.22 MM

OUTER DIAMETER: 19.15 MM.

TIP HEIGHT ( PART ABOVE TOP CAP ): 3.3 MM.

INNER BORE: 9.3 MM

 

 

STRAIGHT CUT 810

810 SIZE TIP, WITH SINGLE O RING AT BASE. WILL FIT 810 RDA'S AND TANKS, WILL ASLO FIT THE GEEKVAPE GRIFFIN TANKS AND FIT WELL ON THE STEAM CRAVE AROMAMIZER PLUS AND TITAN.

THE SIZES ARE AN APPROXIMATE SIZE OF THE SIZE I WILL CUT ON THE LATHE.

TOTAL HEIGHT: 15 MM.

OUTER DIAMETER: 14 MM.

TIP HEIGHT ( PART ABOVE TOP CAP ): 10 MM.

INNER BORE: 9.8 MM.

 

 

 

SMOK TFV8, TFV12